Products

IS-T-300

IS-300
IS-300
IS-300

Configuration
The turnkey-machine is set up and installed easy and can start production right after uncrating.

Solder Pot
All InterSelect selective soldering machines have a Titan solder pot which can handle all kinds of solder alloy. By default the machine is equipped with nitrogen insertion and cover. The intelligent setting makes maintenance and cleaning of the solder pot and the solder simple and quick.

PC and Software
The machine has an integrated PC running Windows 7 and pre-installed machine software. The soldering software features 3 password protected user levels and is designed with an emphasis on intuitive operation.

IS-B-460

IS-460
IS-460
IS-460


Configuration-Variant:
IS-B460 S
„S“ stands for “Single“, which refers to the configuration with one titanium solder pot and one MicroDrop Fluxer.
IS-B460 D
“D“ stands for “Double“, which means that this machine configuration is equipped with two solder pots and one fluxer. This system is suitable for the use of two different solder alloys (e.g. unleaded and leaded). By simply switching between the two solder pots in the software the operator does not need to physically change the solder pot.
IS-B460 P
“P” stands for “Parallel”. The IS-B-460P has two solder pots and two Fluxer which are aligned exactly to each other. With this machine two boards can be processed parallel in one soldering cycle. The whole process of fluxing and soldering happens parallel, which doubles the throughput. The IS-B-460P is ideal for very large volumes and short cycle times.

Configuration
The turnkey-machine is set up and installed easy and can start production right after uncrating.

Solder Pot
All InterSelect selective soldering machines have a Titan solder pot which can handle all kinds of solder alloy. By default the machine is equipped with nitrogen insertion and cover. The intelligent setting makes maintenance and cleaning of the solder pot and the solder simple and quick.

Fluxer
The MicroDrop-Jetfluxer has a Flux-Tank with pressure control and accepts alcohol- and water-based flux types. With an accuracy and repeatability of ± 0.05mm the micro-drop Fluxer reaches a speed of up to 400mm/s.

Preheater
The optional Top- and Bottom-Preheater with infrared emitters can be adjusted depending on the board size to ensure energy-efficient production. While preheating a pyrometer control measures the exact temperature right on the PCB surface and continuously regulates the heating power.

PC and Software
The machine has an integrated PC running Windows 7 and pre-installed machine software. The soldering solftware features 3 password protected user levels and is designed with an emphasis on intuitive operation.

IS-B-460/700 Modular

IS-300

InterSelect Modular systems consist of a flux module, preheat module and solder module. These modules can be arbitrarily set one behind the other in which our customers can adjust the system to their needs perfectly. Despite the small footprints of just 1.2 m for the IS-I-460M (1,4m² for the IS-I-700) soldering system can accommodate very large boards of 460x460mm (700x700m for the IS-I-700) – space efficiency is second to none! As full Inline systems with automatic width adjustment of the transport chain, all IS-I-460 and IS-I-700 modules can be integrated in a production line or between a PCB loader and unloader within minutes.
Variants:

IS-I-460SM or IS-I-700SM as individual soldering module
Ideally suited for low throughput requirements or during introduction phase of a new product. The fluxing, preheat and soldering process are performed successively, resulting in longer cycle times.

Two IS-I-460SM or IS-I-700SM soldering modules
Ideally suited for high throughput requirements. This variant results in a reduction of cycle time. Parallel processing with two soldering units and use of best solder nozzle dimensions with small solder nozzle in the first machine for solder joints and large solder nozzle in the second machine, consequently throughput of boards will be at least doubled compared to variant 1.

Fluxing module IS-I-460FM, preheat module IS-I-460PM and IS-I-460SM soldering module or Fluxing module IS-I-700FM, preheat module IS-I-700PM and IS-I-700SM soldering module
Ideally suited for high mass assemblies which need to be preheated or need long preheat cycles. Fluxing, preheat and soldering are performed simultaneously. Because the soldering process usually is the most time-consuming process, it determines the cycle time.

Fluxing module, preheat module and two IS-I-460SM (or IS-I-700SM) soldering modules
Top Ideally suited for high mass assemblies, as described in variant 2 and 3.

Configuration
The turnkey-machine is set up and installed easy and can start production right after uncrating.

Solder Pot
All InterSelect selective soldering machines have a Titan solder pot which can handle all kinds of solder alloy. By default the machine is equipped with nitrogen insertion and cover. The intelligent setting makes maintenance and cleaning of the solder pot and the solder simple and quick.

Fluxer
The MicroDrop-Jetfluxer has a Flux-Tank with pressure control and accepts alcohol- and water-based flux types. With an accuracy and repeatability of ± 0.05mm the micro-drop Fluxer reaches a speed of up to 400mm/s.

Preheater
The optional Top- and Bottom-Preheater with infrared emitters can be adjusted depending on the board size to ensure energy-efficient production. While preheating a pyrometer control measures the exact temperature right on the PCB surface and continuously regulates the heating power.

PC and Software
The machine has an integrated PC running Windows 7 and pre-installed machine software. The soldering solftware features 3 password protected user levels and is designed with an emphasis on intuitive operation.