The MPM 100 delivers performance that one would expect to find only in higher-priced printing machines. This hard-working printer utilizes the robust, reliable Momentum series platform that has been proven to be at the top of its class in facilities around the world, yet its value pricing makes the MPM 100 an incredible bargain. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput demands grow.

The MPM 100 can accommodate a wide range of PCB sizes from 609.6 mm x 508 mm (24” x 20”) down to is 50.8 mm x 50.8 mm (2” x 2”). Its Wet Print accuracy is +/- 20 microns @ 6 Sigma, CPK ≥2.0. Tighter performance tolerances mean higher repeatability with fewer defects. Plus, a cycle time of 11 seconds ensures moderate to high throughput for its size. For basic, repeatable printing quality with high yields and true affordability, the MPM 100 has no equal.

Numerous Patents protect many of the MPM 100’s proven features, the result of decades of engineering. These features can be found on other MPM printers as well, including the world-class Momentum series printers. These patented features are your assurance of quality, stability, proven performance, and exceptional value in this hard-working, production-ready printing platform.

MPM 100 SPECIFICATIONS
BOARD HANDLING
Maximum Board Size (X x Y) 609.6 mm x 508 mm (24” x 20”)
A dedicated workholder is required for boards with an X size greater than 20”
Minimum Board Size (X x Y) 50.8 mm x 50.8 mm (2” x 2”)
Board Thickness 0.2 mm to 5.0 mm (0.008” to 0.20”)
Maximum Board Weight 4.5 kg (10 lbs)
Board Edge Clearance 3.0 mm (0.118″)
Underside Clearance 12.7 mm (0.5″) standard Configurable for
25.4 mm (1.0”)
Board Hold-Down Fixed top clamps, centernest vacuum
Board Support Methods Magnetic pins
Optional: Vacuum side dams, vacuum pins,
support blocks, dedicated fixtures, patented
auto tooling, Quik-Tool
PRINT PARAMETERS
Maximum Print Area (X x Y) 609.6 mm x 508 mm (24” x 20″)
Print Gap (Snap-off) 0 mm to 6.35 mm (0″ to 0.25″)
Print Speed 0.635 mm/s – 304.8 mm/s
(0.025 in/s – 12 in/s)
Print Force 0 to 22.7 kg (0 lb to 50 lbs)
Stencil Frame Size 737 mm x 737 mm (29″ x 29″)
Adapters available for smaller sizes
VISION
Vision Field-of-View (FOV) 10.6 mm x 8.0 mm (0.417” x 0.315”)
Fiducial Types Standard shape fiducials (see SMEMA
standards), pad/aperture
Camera System Single digital camera
– MPM patented look up/down vision
PERFORMANCE
Total System Alignment ±12.5 microns (±0.0005”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Qualification is performed using production environment process variables; print
speed, table lift and camera movement are included in the capability figure.
Wet Print Deposit ±20 microns (±0.0008”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Based upon actual wet printing with positional accuracy and repeatability verified by
a 3rd party measurement system.
Cycle Time 11 seconds standard
FACILITIES
Power Requirements 200 to 240 VAC (±10%) single phase @
50/60Hz, 15A
Air Supply Requirements 100 psi at 4 cfm (standard run mode) to 18
cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5
L/s), 12.7 mm (0.5”) diameter line, OD x 9.5
mm (3/8”) ID line
Height (excluding light tower) 1589.4 mm (62.57″) at 940 mm (37.0”)
transport height
Machine Depth 1394 mm (54.88″)
Machine Width 1195.4 mm (47.06”)
Minimum Front Clearance 508 mm (20.0”)
Minimum Rear Clearance 508 mm (20.0”)
Machine Weight 797 kg (1757 lbs)
Crated Weight 1090.5 kg (2399 lbs)
* The higher the Cpk, the lower the variability with respect to the process specification limits. In a
process qualified as a 6 sigma process (i.e., one that allows plus or minus 6 standard deviations within
the specification limits), the Cpk is greater than or equal to 2.0.
Specification is subject to change without notice. Please consult factory for specifics.
ITW EAE maintains an ongoing program of product improvement that may affect design and/or price.
We reserve the right to make these changes without prior notice or liability