The MPM® Edison is an innovative new platform of next-generation printers sharing software, controls, and advanced technologies on a scalable platform. Featuring outstanding speed, accuracy, and performance surpassing best-in-class SMT printers worldwide, Edison is built to excel in every way, with patented features throughout its design.

Maximum Board Size (X x Y) 450 mm x 350 mm (17.72” x 13.78”)
A dedicated workholder is required for boards with an X size greater than 14”
Minimum Board Size (X x Y) 50 mm x 50 mm (1.97” x 1.97”)
Board Thickness
Foil Clamps 0.2 mm to 6.0 mm (0.007” to 0.236”)
EdgeLoc 0.8 mm to 6.0 mm (0.031” to 0.236”)
Maximum Board Weight 4.5 kg (10 lbs)
Board Edge Clearance 3.0 mm (0.118″)
Underside Clearance 12.7 mm (0.5″) standard Configurable for
25.4 mm (1.0”)
Board Hold-Down Fixed top clamps, centernest vacuum,
Optional EdgeLoc
Board Support Methods Magnetic pins and blocks
Maximum Print Area (X x Y) 450 mm x 350 mm (17.72 x 13.78″)
Print Gap (Snap-off) 0 mm to 6.35 mm (0″ to 0.25″)
Print Speed 305 mm/sec (12.0″/sec)
Print Force 0 to 20 kg (0 lb to 44 lbs)
Stencil Frame Size Adjustable Stencil Shelves is standard
584.2 mm x 584.2 mm (23” x 23”) to
737 mm x 737 mm (29″ x 29″)
Adapters available for smaller sizes
Vision Field-of-View (FOV) 9.6 mm x 6.0 mm (0.377” x 0.236”)
Fiducial Types Standard shape fiducials (see SMEMA
standards), pad/aperture
Camera System Single digital camera – patented split optics
Total System Alignment ±8 microns (±0.0003”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Qualification is performed using production environment process variables; print
speed, table lift and camera movement are included in the capability figure.
Wet Print Deposit ±15 microns (±0.0006”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Based upon actual wet printing with positional accuracy and repeatability verified
by a 3rd party measurement system.
Cycle Time
300 15 seconds including print and wipe
200 20 seconds including print and wipe
Power Requirements 200 to 240 VAC (±10%) single phase @
50/60Hz, 15A
Air Supply Requirements 100 psi at 4 cfm (standard run mode) to 18
cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to
8.5 L/s), 12.7 mm (0.5”) diameter line
Height (excluding light tower) 1580 mm (62.2″) at 940 mm (37.0”)
transport height
Machine Depth 1442 mm (56.77″)
Machine Width 1282 mm (50.47”)
Minimum Front Clearance 508 mm (20.0”)
Minimum Rear Clearance 508 mm (20.0”)
BTB Configuration 10 mm (0.39”)
* The higher the Cpk, the lower the variability with respect to the process specification limits. In a
process qualified as a 6 sigma process (i.e., one that allows plus or minus 6 standard deviations within
the specification limits), the Cpk is greater than or equal to 2.0.
Specification is subject to change without notice. Please consult factory for specifics.
ITW EAE maintains an ongoing program of product improvement that may affect design and/or price.
We reserve the right to make these changes without prior notice or liability