The MPM® Momentum® Compact printer delivers best-in-class performance and cutting-edge printing in an unexpectedly small package. Designed to meet the challenges of finer pitch PCB applications, the Momentum Compact is ideal for easy line setup with tight floor space requirements.

MPM MOMENTUM COMPACT HIE SPECIFICATIONS
BOARD HANDLING
Maximum Board Size (X x Y) 457 mm x 330 mm (18” x 13”)
Minimum Board Size (X x Y) 50.8 mm x 50.8 mm (2” x 2”)
Board Thickness 0.2 mm to 5.0 mm (0.008” to 0.20”)
Maximum Board Weight 4.5 kg (10 lbs)
Board Edge Clearance 3.0 mm (0.118″)
Underside Clearance 12.7 mm (0.5″) standard Configurable for
25.4 mm (1.0”)
Board Hold-Down Fixed top clamps, centernest vacuum,
EdgeLoc Snugging System
Board Support Methods Magnetic pins
Optional: Vacuum side dams, vacuum pins,
support blocks, dedicated fixtures,
Quik-Tool
PRINT PARAMETERS
Maximum Print Area (X x Y) 457 mm x 330 mm (18” x 13″)
Print Gap (Snap-off) 0 mm to 6.35 mm (0″ to 0.25″)
Print Speed 0.635 mm/s – 304.8 mm/s
(0.025 in/s – 12 in/s)
Print Force 0 to 22.7 kg (0 lb to 50 lbs)
Stencil Frame Size 650 mm x 550 mm (26″ x 22″)
VISION
Vision Field-of-View (FOV) 10.6 mm x 8.0 mm (0.417” x 0.315”)
Fiducial Types Standard shape fiducials (see SMEMA
standards), pad/aperture
Camera System Single digital camera
– MPM patented look up/down vision
PERFORMANCE
Total System Alignment ±12.5 microns (±0.0005”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Qualification is performed using production environment process variables; print
speed, table lift and camera movement are included in the capability figure.
Wet Print Deposit ±18 microns (±0.0007”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Based upon actual wet printing with positional accuracy and repeatability verified by
a 3rd party measurement system.
Cycle Time 7.5 seconds standard
FACILITIES
Power Requirements 200 to 240 VAC (±10%) single phase @
50/60Hz, 15A
Air Supply Requirements 100 psi at 4 cfm (standard run mode) to 18
cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5
L/s), 12.7 mm (0.5”) diameter line x 9.5 mm
(3/8”) ID line
Height (excluding light tower) 1562 mm (61.5″) at 940 mm (37.0”)
transport height
Machine Depth 1200 mm (47.25″)
Machine Width 1106 mm (43.5”)
Minimum Front Clearance 508 mm (20.0”)
Minimum Rear Clearance 508 mm (20.0”)
Machine Weight 862 kg (1900 lbs)
Crated Weight 1155.5 kg (2547 lbs)
* The higher the Cpk, the lower the variability with respect to the process specification limits. In a
process qualified as a 6 sigma process (i.e., one that allows plus or minus 6 standard deviations within
the specification limits), the Cpk is greater than or equal to 2.0.
Specification is subject to change without notice. Please consult factory for specifics.
ITW EAE maintains an ongoing program of product improvement that may affect design and/or price.
We reserve the right to make these changes without prior notice or liability.