The MPM® Momentum® Elite is the top-performer of the Momentum series, boasting the highest throughput and shortest cycle times of all. Its vision system is driven by servos for speed, and it’s configured with a highly-efficient triple track rail system featuring an input buffer, a central processing section, and an output buffer.

MPM MOMENTUM SERIES SPECIFICATIONS
BOARD HANDLING
Maximum Board Size (X x Y) 609.6 mm x 508 mm (24” x 20”)
Staging Mode – Momentum Elite 457 mm x 508 mm (18” x 20”)
A dedicated workholder is required for boards with an X size greater than 20”
Minimum Board Size (X x Y) 50.8 mm x 50.8 mm (2” x 2”)
Board Thickness 0.2mm (0.008”) to 5.0mm (0.20”),
up to 6.0 mm (0.24”) without top clamp foils
Maximum Board Weight 4.5 kg (10 lbs)
Board Edge Clearance 3.0 mm (0.118″)
Underside Clearance 12.7 mm (0.5″) standard Configurable for
25.4 mm (1.0”)
Board Hold-Down Fixed top clamps, centernest vacuum,
EdgeLoc (Optional on HiE)
Board Support Methods Magnetic pins
Optional: Vacuum side dams, vacuum pins,
support blocks, dedicated fixtures, patented
auto tooling, Quik-Tool
PRINT PARAMETERS
Maximum Print Area (X x Y) 609.6 mm x 508 mm (24” x 20″)
Print Gap (Snap-off) 0 mm to 6.35 mm (0″ to 0.25″)
Print Speed Up to 305 mm/sec (12.0”/sec)
Print Force 0 to 20 kg (0 lb to 44 lbs)
Stencil Frame Size 737 mm x 737 mm (29″ x 29″)
Adapters available for smaller sizes
VISION
Vision Field-of-View (FOV) 10.6 mm x 8.0 mm (0.417” x 0.315”)
Fiducial Types Standard shape fiducials (see SMEMA
standards), pad/aperture
Camera System Single digital camera
– MPM patented look up/down vision
PERFORMANCE
Total System Alignment ±12.5 microns (±0.0005”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Qualification is performed using production environment process variables; print
speed, table lift and camera movement are included in the capability figure.
Wet Print Deposit ±20 microns (±0.0008”) at 6 sigma,
Accuracy and Repeatability Cpk ≥ 2.0*
Based upon actual wet printing with positional accuracy and repeatability verified by
a 3rd party measurement system.
Cycle Time
Momentum HiE 7.5 seconds standard
Momentum Elite 6.0 seconds standard
FACILITIES
Power Requirements 200 to 240 VAC (±10%) single phase @
50/60Hz, 15A
Air Supply Requirements 100 psi at 4 cfm (standard run mode) to 18
cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5
L/s), 12.7 mm (0.5”) diameter line
Height (excluding light tower) 1638.4 mm (64.5″) at 940 mm (37.0”)
transport height
Machine Depth 1593.1 mm (62.72″)
Machine Width
Momentum HiE 1202.7 mm (47.35”)
Momentum Elite 1675.5 mm (65.96”)
Minimum Front Clearance 508 mm (20.0”)
Minimum Rear Clearance 508 mm (20.0”)
Machine Weight
Momentum HiE 862 kg (1900 lbs)
Momentum Elite 899 kg (1982 lbs)
Crated Weight
Momentum HiE 1155.5 kg (2547 lbs)
Momentum Elite 1192.5 kg (2629 lbs)
© 2017 ITW all rights reserved. Momentum Series 04-17 www.itweae.com
ITW EAE is a division of Illinois Tool Works, Inc. It is a consolidation of all of its Electronic Assembly
Equipment and Thermal Processing Technology. The group includes world-class products from MPM,
Camalot, Electrovert (Speedline), Vitronics Soltec and Despatch.
* The higher the Cpk, the lower the variability with respect to the process specification limits. In a
process qualified as a 6 sigma process (i.e., one that allows plus or minus 6 standard deviations within
the specification limits), the Cpk is greater than or equal to 2.0.
Specification is subject to change without notice. Please consult factory for specifics.
ITW EAE maintains an ongoing program of product improvement that may affect design and/or price.
We reserve the right to make these changes without prior notice or liability