
Interested? Get a quote or more information:
Description
Bouwjaar: 2006
Conditie: Gebruikt, functioneel
Inclusief ca. 120 kg tin
The ERSA ETS 250 is a compact wave soldering system for small- to medium-volume series production of through-hole and mixed-technology PCB assemblies. Assemblies are carried in solder frames on a chain conveyor through the fluxing, preheating and wave soldering stages. The basic machine has a foam fluxer and works with low-solids fluxes. The stainless steel solder module can be a single-wave version or an SMD version with a double wave, and the SMD wave can be added later. Because this is a used machine, check the options and configuration of this unit before buying.
Key features
- Compact wave soldering system with a 250 mm working width
- Chain conveyor with manually adjustable conveyor angle
- Foam fluxer as standard, designed for low-solids fluxes
- Temperature-controlled preheating unit
- Speed-controlled solder pumps for a consistent, repeatable wave
- Single-wave or double-wave (SMD) solder module; SMD wave can be retrofitted
ERSA ETS 250
Used ERSA ETS 250, a compact wave soldering system with a 250 mm working width for small- to medium-volume PCB production.
Specifications
| Working width | 250 mm |
|---|---|
| Length (floor stand) | 1,720 mm |
| Width | 770 mm |
| Height with floor stand | 1,430 mm |
| Weight | approx. 250 kg (without solder) |
| Conveyor type | Chain conveyor |
| Conveyor angle | 4-7°, manually adjustable in 0.5° steps |
| Conveyor speed | 0.3-2.5 m/min |
| Flux storage tank | 2 l |
| Solder volume | approx. 120 kg |
| Warm-up time | approx. 2 h |
| Preheating length | 800 mm |
| Exhaust volume | approx. 400 m³/h; exhaust stack 2 x 120 mm |
| Power supply | 3 x 230/400 V, N, PE, 50 or 60 Hz |
| Nominal rating | 8 kW |