
Interested? Get a quote or more information:
Description
The LPKF ProtoMat 93S is a used mill/drill unit for in-house production of prototype printed circuit boards. It removes copper to isolate tracks and drills holes directly from PCB layout data, which cuts the time needed to test a design before series production. The manufacturer's manual says it can also produce gravure films and engrave aluminium or plastic. It is controlled from a PC through LPKF's BoardMaster driver software over a serial connection.
Key features
- Computer-controlled milling and drilling of prototype PCBs
- Also suitable for gravure films and engraving aluminium or plastic
- Fine positioning resolution of 0.0079375 mm per step
- Controlled with HP-GL commands through LPKF BoardMaster software
- RS232 serial connection to the controlling PC
- Compact unit with integrated electronics, weighing 16 kg
LPKF ProtoMat
Used LPKF ProtoMat 93S, a computer-controlled circuit board plotter for milling and drilling prototype PCBs, gravure films and engravings in aluminium or plastic.
Specifications
| Power supply | 115/230 V, 50/60 Hz, 260 VA |
|---|---|
| Drilling performance | Up to 60 strokes/minute |
| Resolution (smallest step) | 0.0079375 mm (0.0003125 in) |
| Spindle | LPKF type 4025 |
| Motors | Vexta C7317-9212 2-phase stepping motor |
| Weight | 16 kg |
| Control language | HP-GL (interpreted by SMCU control unit) |
| Driver software | LPKF BoardMaster |
| PC interface | RS232 serial (SERIAL 1), null modem cable |
| Serial settings | 9600 baud, 8 data bits, 1 stop bit, no parity, hardware handshake |