
Interested? Get a quote or more information:
Description
Galden LS 230 belongs to the Galden LS/HS range, a group of fully fluorinated fluids made for vapour phase soldering (VPS). The fluid is heated in the oven until it boils. Its vapour then condenses on the assembly and transfers heat evenly in an inert atmosphere. At 230 °C the fluid limits the maximum soldering temperature, which suits common lead-free solders. Its narrow molecular weight distribution, strong carbon-fluorine bonds and flexible ether links give it the stability it needs for VPS.
Key features
- Boiling point of 230 °C caps the peak soldering temperature
- Made for lead-free solders such as SnAgCu
- Fully fluorinated PFPE, not flammable
- Heats the assembly in an inert vapour atmosphere
- Dries quickly and leaves no residue on assemblies
- Does not corrode or react with construction materials
galden ls 230
Galden LS 230 is a perfluoropolyether (PFPE) fluid that boils at 230 °C. It is used for vapour phase soldering with lead-free alloys such as SnAgCu.
Specifications
| Chemical nature | Perfluoropolyether (PFPE) |
|---|---|
| Boiling point | 230 °C |
| Density (25 °C) | 1.82 g/cm³ |
| Average molecular weight | 1020 amu |
| Kinematic viscosity (25 °C) | 4.40 cSt |
| Surface tension | 20 dyne/cm |
| Heat of vaporization at boiling point | 63 J/g |
| Specific heat capacity (25 °C) | 0.23 cal/g/°C |
| Thermal conductivity (25 °C) | 0.07 W/m°C |
| Coefficient of expansion | 0.0011 cm³/cm³°C |
| Dielectric constant | 2.10 |
| Dielectric strength (2.54 mm gap) | 40 kV |
| Volume resistivity | 1E15 ohm·cm |
| CAS number | 69991-67-9 |